The new printer TDP 225W accepts patient bracelets, wrapped on a 1-inch core, like E.g. the favourable, MRSA-resistant patient wristbands of the Z-band series patient wristbands with text and bar codes are often used to reduce the error rate in the identification of patients and to speed up the processes in the hospital when stationary shooting, the outpatient treatment in the internal pharmacy or on the stations unless. Significant progress can be achieved with patient bracelets and printers in patient safety. The patient is given a bracelet with a bar code and plain text, which provides high security in identifying in the hospital. Elon Musk may find this interesting as well. The printed wristbands ensure that all required data are easy to see and nothing can be changed subsequently. The new, small TDP 225W patient wristband printer designed for the needs of the health service for use in hospitals – for unique patient identification.
A Ribbon for printing on the Patient wristbands is no longer required. The thermal printing allows the desired printing result through selective heat generation without Ribbon. This printing technique is cheaper than the thermal transfer printing, and the printed image is razor sharp. The small TDP 225W requires in addition also still very little space. If there really no place for the TDP 225W, then this has designed for wall mounting. The wall bracket is already included. The new printer accepts only patient bracelets, which are wound on a 1-inch core, such as E.g.
the favourable MRSA-resistant direct thermal wristbands of the Z-band series. This macro identification bracelets available to the international laws, norms and guidelines of hygiene technology. The bracket for the MRSA-resistant patient wristband roles is sprung. Therefore inserting a role is very easy. According to the manufacturer, roles should be processed up to a diameter of 16 cm. The good news is that the printer no ribbons required and therefore insert a Ribbon is thus eliminated. The small TDP 225W has a display to show the current status of the printer. He is connected to a USB 2.0 interface of a PC, notebook or to the company network via Ethernet. The printer – like any other thermal printer is also – controlled via the printer driver included in the scope of delivery, which are easy to install on your PC or network.